One set of 6 individual gradient flame stickers.

flame gradient symbols for use on a gas stove/hob in a CLOCKWISE direction (see listing picture with measurements - please check your stove to ensure these LARGE stickers will fit).

These stickers are designed to replace worn stove/cooker markings. They are reasonably hard wearing but whether they are as hard wearing as the original manufacturer's applied version - only time will tell - but so far so good.

They are made of heat resistant material and will withstand boiling water and will self extinguish if subjected to a flame test. The print is protected by a thin layer of transparent vinyl and as a consequence they are able to withstand normal cleaning with a cloth.

Please note these stickers are not calibrated or designed for any specific oven or stove. The buyer should check to ensure the sticker markings match those being replaced. Mismatched markings can be a safety hazard.

Each transparent self adhesive sticker is sized 6mm wide and extends in a semi circle covering an arc of about 165 degrees with the arc having a radius of 25mm (50mm diameter to the inner edge). In the listing picture, the edge of each sticker is outlined in magenta but this is only for illustrative purposes to show the outer dimensions. The magenta coloured lines are not printed on the version you receive. The diameter is relatively wide and its important that you check the diameter of you stove's dials to ensure that these LARGE flame stickers will fit and not overlap.

 They are very easy to apply but before applying please ensure the stove/cooker hob surface is very clean and thoroughly dry before attempting to position the sticker.

Then simply peel off  each sticker from its paper backing (you might need to bend the backing slightly to allow the sticker to be peeled away) and apply one at a time to the stove's surface.

It is suggest you take your time and pre-plan where you are going to place the stickers so that the final outcome looks symmetrical and neat. 

Once in position, rub the sticker to remove any air bubbles.  The colour of the sticker design is either black which shows well on silver and light coloured backgrounds or white which shows well on dark surfaces such as black or green.  Please select your colour preference accordingly.
Black print will not work with a black stove nor will white print on a white or silver stove.

If you are not entirely satisfied please contact us within 30 days of receipt at and we will liaise with you to ensure you receive the refund you are entitled to.

FREE in the UK.
70 pence for all other countries in the EU.
£1 for the rest of the world outside the EU
If you spend £8 or more FREE SHIPPING anywhere

Thank you